Clevis Pins

3/16″ through 5/8″ diameters

Clevis pins are intended for use in conjunction with clevises and rod end eyes. The length of a clevis pin is measured from under the head to the end of the pin. The effective grip length should be measured from under the head to the top of the hole. Pins are supplied without a point; however, a point can be provide if required. Special clevis pins from 3/16″ through 5/8″ diameter can be made to customer specifications. Contact our Engineering Department for information regarding your special clevis pin needs.

SAE Standard Clevis Pin Specifications

SAE Standard Clevis Pin Specifications